Author: v.sutharsan
BILLS OF QUANTITIES (BOQ) The survival of any business is heavily depend on the success of commercial management. When it comes to commercial management in construction industry, Bill of …
This product must be used for educational Purpose only Step 1 : Go and select your product Download education purpose Autodesk Products for free Step 2 : Select Your …
Sustainable Construction is the selection of materials or products for the construction activities in terms of reducing the use of natural resources, ability of reusing the materials and reducing …
A prime coat is an application of a low viscosity asphalt to a granular base in preparation for an initial layer (or surface course layer) of asphalt. The purpose …
Steel bars should cut and bend to the required shape at the bar bending plant located in site. Initially the required bar schedule prepared according to the reinforcement drawings by the structural …
Reinforced concrete is one of the most widely used modern building materials. Concrete is an “artificial stone” obtained by mixing cement, sand, and aggregates with water. Fresh concrete can be moulded …
Normally, steel bars have a 6m length. If length of a bar is not enough to keep the reinforcement, we have to lap two steel bars. Normally, lapping position is …
Road roller (sometimes called a roller-compactor, or just roller) is a compactor type engineering vehicle used to compact soil, gravel, concrete, or asphalt in the construction of roads and …
A paver (paver finisher, asphalt finisher, paving machine) is an engineering vehicle used to lay asphalt on roadways. It is normally fed by a dump truck. A separate machine, …
A compactor is a machine or mechanism used to material soil through compaction in construction industry. In construction, there are three main types of compactor: Plate compactor Jumping Jack. Road …